Telepen Message Length - Honeywell Voyager 1200g User Manual

Telepen Redundancy bar code below, then scan a redundancy count
between 0 and 10 on the Programming Chart inside the back cover of this
bar code. Default = 0.
manual. Then scan the Save
Telepen Redundancy

Telepen Message Length

Scan the bar codes below to change the message length. Refer to
Message Length Description (page 7-2) for additional information. Mini-
mum and Maximum lengths = 1-80. Minimum Default = 3, Maximum
Default = 80.
Minimum Message Length
Maximum Message Length
7 - 34