Honeywell Voyager 1200g User Manual page 85

To rename scanners with sequential, numeric names, scan the following bar
codes. Scan the Reset code after each name change and wait for the scanner
to relink to the base.
You may also scan the following Scanner Name bar code and scan up to 30
numbers and/or letters for the scanner name. For example, if you wanted to
name the linked scanner "312," you would scan the following bar code, scan the
3, 1, and 2 bar codes on the
manual, then scan Save. Scan the Reset bar code and wait for the scanner to
relink to the base.
To output the name of the scanner, scan the following bar code. The name will
be output showing the product name, model number, and the scanner's 10-digit
serial number.
0001
0003
0005
0007
Programming Chart
Scanner Name
0002
0004
0006
Reset
inside the back cover of this
3 - 21