Honeywell Voyager 1200g User Manual page 270

• The bas or Access Pointe may not be programmed to output your bar
code data properly. For example, you scan "12345" and the host
displays "A12345B."
Reprogram the base/Access Point with the proper symbology selections.
See Chapter
The scanner won't read your bar code at all.
• Scan the sample bar codes in the back of this manual. If the scanner
reads the sample bar codes, check that your bar code is readable.
Verify that your bar code symbology is enabled (see
If the scanner still can't read the sample bar codes, scan
Symbologies
12 - 6
7.
on page 7-1.
Chapter 7).
All