Centering Section
The Centering section determines the centering window for bar code scanning.
ScanWedge Entry
CenteringEnable=
CenteringTop=
CenteringBottom=
CenteringLeft=
CenteringRight=
Dolphin® Power Tools User's Guide
Description
Enable and disables the decode
centering window for the decoder.
Specifies the top coordinate of the
centering window.
Specifies the bottom coordinate of
the centering window.
Specifies the left coordinate of the
centering window.
Specifies the right coordinate of
the centering window.
Default
Value
0
210
270
346
406
Rev A
8/6/08
Available Values
0=Disabled; centering is
disabled for ScanWedge.
1=Enabled; bar codes are
decoded only if they are
within the centering window
specified by the rest of the
keys in this section.
Enter the coordinates in pixels.
5 - 11