Honeywell Dolphin 9900 User Manual page 116

RASMan Configuration File
RASMan application settings are stored in the Settings section of \IPSM\RASMan.exm. Use
Editor (see page 2-2) to change the values in the RASMan.exm file.
Key
Retry
RetryDelay
ShowError
ShowStatus
StatusMessageDelay
StopOnCriticalError
TrayIcon
6 - 12
Description
Specifies the retry count.
Specifies the retry delay.
Enables and disables error
messages on connecting.
Enables and disables the
appearance of status dialog boxes.
Specifies a delay in milliseconds (i.e
1000 is 1 second) to apply after
status and error messages are
displayed.
Forces RASMan to stop running
when a critical error occurs.
Enables or disables the RASMan
tray icon.
Rev A
8/6/08
Default Available Values
Value
10
1000 Enter values in milliseconds.
1 0=Disable
1=Enable
1 0=Disabled; status dialogs do not
appear.
1=Enabled; status dialogs do
appear.
25 X=Number of milliseconds.
1 0=Disabled; RASMan continues
to run when a critical error
occurs.
1=Enabled; RASMan stops
running when a critical error
occurs.
1 0=Disable
1=Enable
Dolphin® Power Tools User's Guide
EZConfig