Formatting Section - Honeywell Dolphin 9900 User Manual

Formatting Section

ScanWedge supports data formatting.
The Formatting section contains subsections and each subsection supports one data format.
Formatting Subsections
Subsection Description
Key
Format Specifies data formatting parameters
CodeID Identifies the Code ID that the bar code's
symbology must have for the format to be
applied. The Code ID is a single character that
is case-sensitive; e.g., set CodeID=j to apply
the format to Code 128 only.
Length Determines the length the bar code data must
have for the format to be applied.
5 - 12
Default
Value
Empty
Empty
Empty
Rev A
8/6/08
Available Values
See Available Data Formatting
Commands on page 5-13.
Empty=No Code ID
X=See Code ID on page 5-14.
Empty=Format applies to any
length
0=Format applies to any length
X=The length
Dolphin® Power Tools User's Guide