Honeywell Dolphin 9900 User Manual page 58

Security Section
The Security section has no keys and one child section named "Supplicant," which contains several
profile subsections.
Supplicant Section
The Supplicant section consists of a number of child sections. The default child section is named Profile1
and contains all the keys necessary to create a configuration profile for the WLAN radio.
To create multiple radio configurations, copy the Profile1 section and paste it at the root level of the
Supplicant section. Then, rename that profile and configure the keys according the desired network
configuration. Each child section name is arbitrary, but each name must be different.
The Supplicant section contains one key named ActiveProfile. Type in the Value equal to name of one
of the desired profile child sections.
When DeviceConfig is activated on the terminal, the terminal will apply the settings in the profile specified
in the ActiveProfile key. If the ActiveProfile key does not have a matching profile, the radio will be enabled
by DeviceConfig but no specific radio configuration will be activated, which means that the radio will not
connect to your network.
Profile Subsections
Each Profile subsection contains the keys that configure the radio connection from the terminal to the
network.
Key Description
SSID The service set identifier used to connect to
network; usually the network name of the
access point or peer station.
Assoc. Mode The general association mode (sometimes
called "authentication") of the radio.
Encryption The encryption mode available for the
association mode.
3 - 4
Default
Value
N/A
N/A
N/A
Rev A
8/6/08
Available Values
X=Your network's SSID
Any=Connect to any network
• None (no authentication or
encryption)
• WEP
• IEEE 802.1X
• WPA-Personal (PSK)
• WPA-Enterprise (EAP)
• WPA(2)-Personal (PSK)
• WPA(2)-Enterprise (EAP)
Open & Shared (WEP)
TKIP, AES-CCMP, TKIP &
CCMP (WPA)
Dolphin® Power Tools User's Guide