Honeywell Dolphin 9900 User Manual page 88

Decode Section
The Decode section specifies decoder settings when using the decoder with ScanWedge.
ScanWedge Entry
GoodScanFreq
GoodScanLen
BadScanFreq
BadScanLen
5 - 10
Description
Sound frequency used for play a
custom good scan beep.
Note: The Window's "Good Decode"
sound (if defined in the control
panel) takes precedence over
this option.
Number of milliseconds to play the
sound as specified in GoodScanFreq
key.
Sound frequency used for play a
custom bad scan beep.
Note: The Window's "Bad Decode"
sound (if defined in the control
panel) takes precedence over
this option.
Number of milliseconds to play the
sound as specified in BadScanFreq
key.
Rev A
8/6/08
Default Available Values
Value
2749 Variable
Use the up and down arrows to
change the number
OR
Type in the code for the sound
50
you want.
523
25
Dolphin® Power Tools User's Guide