Honeywell Dolphin 9900 User Manual page 82

Settings Section
The Settings section determines how ScanWedge interprets data from the decoder, serial port, and IrDA
interface.
0 = Disable 1 = Enable
Settings Section
Key
SuffixID
SoundConnect
MessageConnect
This key applies only
to the IrDA and serial
ports.
Accept EZConfig
This key applies only
to the decoder.
5 - 4
Description
Specifies the symbology identifier sent
after the decoded/received data.
Enables and disables
• The sound that ScanWedge makes
when starting up, shutting down, or
restarting.
• The audio notification when an IrDA
session is established and closed
and the serial port is opened and
closed.
Enable and disables a notification
message when an IrDA session is
established and closed and the serial
port is opened and closed.
Enables and disables ScanWedge's
compatibility with EZConfig Client when
decoding bar codes.
Rev A
8/6/08
Default Available Values
Value
0 0=No symbology identifier is
sent.
1=The Code ID is sent.
2=The AIM ID is sent.
3=The SymModifier is sent.
1 0=Disabled
1=Enabled
Note: Audio notifications for
errors can't be disabled.
0 0=Disabled
1=Enabled
1 0=Disabled; ScanWedge
processes EZConfig
barcodes as it would any
other barcode.
1=Enabled; ScanWedge
recognizes EZConfig
barcodes and passes them
on to the EZConfig Client for
further processing.
Dolphin® Power Tools User's Guide