Nosip - Honeywell Dolphin 9900 User Manual

NoSIP

NoSIP toggles the Soft Input Panel (SIP) between enabled and disabled. When disabled, the SIP does
not pop up over application windows automatically. In addition, the SIP icon
Command bar on application windows.
To Enable NoSIP
1. Tap Start > Power Tools. The
2. Tap the NoSIP icon once
Note: To disable the SIP automatically after each hard reset, enable the NoSIP Program section of the
File (see page 4-1).
To Disable NoSIP
Navigate to the Power Tools Main Window
OR
Select Exit on the Command Bar Menu
Command Bar Menu
When NoSIP is enabled, a smaller NoSIP icon appears in the Command bar at the bottom of the Today
screen . Tap this icon to open the Command bar menu:
Menu Item Selecting this item ...
Enable SIP Enables the SIP without stopping NoSIP.
When this item is selected, the indicator in the Command bar changes to
to indicate that the SIP is now active, even though the NoSIP is still running.
About Displays version and description information for NoSIP.
Exit Disables NoSIP; the icon no longer appears in the Command bar.
Command Line Arguments
/noicon
/nosound
/nohotkey
/enable
/disable
Dolphin® Power Tools User's Guide
Power Tools Main Window
. The SIP should not pop up on application screens.
(see page 1-2) and tap the NoSIP icon again.
(page 6-9).
Run NoSIP with no icon
Turn off the sound
Disable the NoSIP hotkey
Enable the SIP
Disable the SIP
(see page 1-2) appears.
.
Rev A
8/6/08
does not appear in the
Autorun.exm
6 - 9