Menu Configuration File Sections; Settings Section - Honeywell Dolphin 9900 User Manual

Menu Configuration File Sections

Menu configuration files contain of two basic sections: Settings and MenuEntries. Both sections are
locked, which means only their Values can be changed, not their section names.

Settings Section

The Settings section defines general EZMenu settings. The keys in this section are locked, which means
that only their Values can be changed.
Key
Sig
Version
EnableDebug
ListViewMode
Caption
StartMenu
OK
Menu
The following three parameters determine the icon spacing in all view modes:
ListViewIconSpacingY
ListViewIconSpacingX
ListViewGradient
Dolphin® Power Tools User's Guide
Description
Identifies this file as a menu file.
This is the EZMenu version number.
Enables system debugging.
Determines the default view mode
for the window. For details, see
View Options on page 1-3.
Defines the caption or title displayed
in the title bar of the application
window.
Enables and disables access to the
Start menu from the application
window.
Enables and disables the OK button
in the upper right corner of the
application window.
Determines which menus appear in
the Command bar. There are three
menus: File, View, Help.
Exit=File menu
View=View menu
Default=File, View & Help menus
Sets vertical icon spacing.
Sets horizontal icon spacing.
Determines whether the gradient
background (horizontal blue and
white lines) appears on the window.
Default
Value
EZMenu
1
0
3
Variable
Variable
Variable
3
80
75
1
Rev A
8/6/08
Available Values
These keys are read-only and
cannot be changed.
0=Disable 1=Enable; an
Easymenu.log file is created in
the \IPSM folder.
0=Detail
1=List
2=Small Icon
3=Large Icon
User-defined
0=Disable Start Menu
1=Enable Start Menu
0=Disable OK Button
1=Enable OK Button
0=No Menus
1=Default Menu + No Exit + No
View
2=Default Menu + No Exit
3=Default Menu
Spacing is measured in pixels.
Spacing is measured in pixels.
0=Disable gradient background
1=Enable gradient background
10 - 3