Rasman - Honeywell Dolphin 9900 User Manual

RASMan

RASMan establishes a PPP (Point-to-Point Protocol) connection with a RAS server.
To Enable RASMan
1. Tap Start > Power Tools. The
2. Click the RASMan icon once
the RASMan Configuration File
Note: To start RASMan automatically after each hard reset, enable the RASMan Program section of the
Autorun.exm File
To Disable RASMan
Navigate to the Power Tools Main Window
OR
Select Exit on the Command Bar Menu
Command Bar Menu
When RASMan is enabled, the RASMan icon appears in the Command bar at the bottom of the Today
screen . Tap this icon to open the Command bar menu.
Menu Item Selecting this item ...
Auto Connect This item is selected by default; it means that the terminal is connected to the RAS server via
PPP.
Connect Re-establishes the PPP connection if it was disconnected.
Disconnect Disconnects the PPP connection.
About Displays version and description information about RASMan.
Exit Disables RASMan; the icon no longer appears in the Command bar.
6 - 10
Power Tools Main Window
. The PPP connection is established according to the settings in
(see page 6-11).
(see page 4-1).
(see page 1-2) and tap the RASMan icon again.
(page 6-10).
Rev A
8/6/08
(see page 1-2) appears.
Dolphin® Power Tools User's Guide