Activesync Section - Honeywell Dolphin 9900 User Manual

GSM Section
If there is no GSM radio installed in the terminal, disable this section.
Key Description
Enable Enables and disables the GSM radio.
APN Enter the Access Point Name (APN) for
the GPRS network.
IPAddress Enter the IP Address.
Protocol Enter the protocol to use.
Username Enter the username for the GPRS
connection.
Password Enter the password associated with the
username for the GPRS connection.
Note: This key is encrypted; see

ActiveSync Section

The ActiveSync Section configures the terminal's ActiveSync connection parameters.
Key Description
AutoConnect Enables and disables the ActiveSync
connection when the terminal first
connects to the communication
peripheral.
Connection Specifies the connection type and baud
rate.
3 - 8
Encrypted on page 2-14.
Rev A
8/6/08
Default Available Value
Value
0 0=Disable
1=Enable; when enabled, the
WLAN radio turns off
automatically.
Empty APN value
Empty Empty=GSM uses DHCP (server-
assigned IP address)
X=IP address
IP Protocol type
Variable Empty=Disabled
0=Disabled
X=The username for the GPRS
connection.
Variable Empty=Disabled
0=Disabled
X=The password for the GPRS
connection.
Default Available Values
Value
1 0=Disable ActiveSync connection
1=Enable ActiveSync connection
'USB `USB Connection
Connection `115200 Default
`19200 Default
`38400 Default
`57600 Default
Note: These values must be typed
in exactly as they appear
here.
Dolphin® Power Tools User's Guide