Chapter 5 - Scanwedge; Enabling Scanwedge - Honeywell Dolphin 9900 User Manual

5
ScanWedge
Overview
ScanWedge sends data from the decoder, serial port, or IrDA interface to the foreground application as
keystrokes (as if the data were entered via the keyboard). The foreground application is the open software
application whose window is currently active on the display.
As a result, you can review input data in Windows Mobile applications such as Pocket Word, Pocket
Excel, and Inbox without having to load third-party applications.

Enabling ScanWedge

Tap the ScanWedge icon once
Command Bar Menu
When ScanWedge is enabled, a smaller ScanWedge icon appears in the command bar at the bottom of
the Today screen.
Tap this icon to open the command bar menu.
Menu Item This item ...
Enable Enables and disables ScanWedge without exiting ScanWedge.
Settings Opens the ScanWedge.exm file in EZConfig Editor.
About Opens the About screen for ScanWedge.
Exit Exits ScanWedge. The icon no longer appears in the Command bar.
Enabling ScanWedge at Startup
To run ScanWedge automatically when the Dolphin terminal boots up,
Add a link to the Scanwedge.exe in the \WINDOWS\STARTUP folder
OR
Enable the ScanWedge section of the
Dolphin® Power Tools User's Guide
. ScanWedge initializes and enables.
Autorun.exm File (see page 4-1).
Rev A
8/6/08
5 - 1