Working With Keys - Honeywell Dolphin 9900 User Manual

Working with Keys

Keys have a Name, a Description, and a Value and reside inside sections. For specific key values, consult
the chapters of this user's guide that describe the EXM file you're attempting to edit.
Edit Menu Options
Select a key and right-click or click Edit to see the available options.
Menu Item Description
Rename Activates the key name so that you can rename the key. Rename is disabled if the key
is locked or disabled; see
Cut Cuts a selected key.
Copy Copies a selected key.
Paste Disabled; keys can be pasted only as children of a section.
Paste as Child Pastes the key just cut or copied in the selected section. Keys are not multi-level; all
keys paste at the same level within a section.
You can cut, copy and paste keys within an EXM file or across EXM files.
Delete Deletes a selected key.
You cannot undo a delete; you might want to consider disabling rather than deleting.
Enable Enables keys that were disabled. When a key is enabled, the client application can
read and apply its value. When you enable a key, make sure to specify a value for that
key; do not leave it blank.
To enable a key, its parent section must be enabled.
2 - 12
The same options
appear on both
menus.
Key Types (page 2-14).
Rev A
8/6/08
Dolphin® Power Tools User's Guide