Table of Contents
Advertisement
Set Up the Base Station
The wireless repeating function works only in hub and spoke mode. The units cannot be
daisy-chained. You must know the wireless settings for both units. You must know the MAC
address of the remote unit. First, set up the base station, then set up the repeater.
To set up the base station:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Enter http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Wireless Repeating Function.
5.
Select the Enable Wireless Repeating Function check box.
6.
Select the Wireless Base Station radio button.
7.
To prevent wireless clients from associating with the base station and allow LAN client
associations only, select the Disable Wireless Client Association check box.
You can leave the check box cleared if you prefer wireless clients to be able to associate
with the base stations.
8.
In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access
points that should function as repeaters.
If your router is the base station, it can function as the "parent" for up to four other access
points.
9.
Click the Apply button.
Your changes are saved.
U.S. Cellular® 4G LTE™ Router (LG2200D)
Specify Network Settings
65
Advertisement
Table of Contents
