Ptz Control Method: Dvm Selects Ptz Protocol; Figure 2-29 Dvm System Camera Control; Figure 2-30 Dvm System Ptz Controls - Honeywell HNVE130A User Manual

Figure 2-29
4. Set the camera control type on the drop-down list to Use streamer settings.
5. Select the Live View tab.
Note The PTZ controls should now appear at the bottom of the live view
page.
6. Test the PTZ controls to verify correct operation (see
Figure 2-30

PTZ Control Method: DVM Selects PTZ Protocol

In this method, the DVM system determines the camera protocol and the
HNVE130A passes the commands transparently to the PTZ camera. The
HNVE130A is configured for PTZ operation through the HTTP interface as
follows:
1. Open internet explorer or another internet browser of your choice.
Rev 1.04
DVM System Camera Control
DVM System PTZ Controls
30
Figure 2-30).
Document 900.0572
09/06