Configuring The Streamer; Figure 2-20 Web Browser Logon - Honeywell HNVE130A User Manual

Figure 2-20
Note A video source or camera must be connected to the encoder to view
images.

Configuring the Streamer

The HTTP web interface allows the streamer to be configured for your particular
application. Many of the settings are managed by the DVM system and should
not be adjusted with the web interface. Other settings such as network
configuration and changing the password can be changed through the web
interface, but should be adjusted using the ENCP utility provided on the product
CD along with this manual.
The web interface is accessed as follows:
1. Open internet explorer or another internet browser of your choice.
2. Connect to the HTTP server on the HNVE130A by entering its IP address in
the URL link of our browser. For example http://xx.xx.xx.xx where xx is the IP
address of the HNVE130A.
3. Enter the user ID and password (see
Rev 1.04
Web Browser Logon
Figure 2-20).
21 Document 900.0572
09/06