Installing Adapter To Dvm Server; Figure 2-14 Installshield Wizard Complete - Honeywell HNVE130A User Manual

5. Once the files are installed, the following screen will appear as shown in
Figure 2-14.
Figure 2-14
6. Click Finish to complete the Adapter installation.

Installing Adapter to DVM Server

Following are the steps to install the Honeywell HNVE130A Adapter on the DVM
Server:
1. Double-click the HNVE130A_RapidEye_Adapter.exe executable file.
The welcome screen appears.
2. Click Next. The following screen will appear as shown in
Rev 1.04
InstallShield Wizard Complete
16
Figure 2-15.
Document 900.0572
09/06