Table of Contents
Advertisement
4.
After the installation is complete,
Figure 2-17
5.
Click Finish to exit from the InstallShield Wizard.
After the installation is complete, the Camera Service restarts automatically.
Viewing Live Images
Verify that the encoder is working properly before trying to view live images from
the DVM system. Live images can be viewed from an internet browser with the
web interface. An active-X control must be downloaded to your computer before
you will be able to view images. The security settings on your browser may need
to be modified to allow active-X controls to be downloaded.
Configure and view live images as follows:
1.
Open Internet Explorer on your PC.
2.
On your web browser, select the Tools drop-down menu, then Internet
Options.
3.
Select the Security tab (see
Rev 1.04
Figure 2-17
InstallShield Wizard Complete
Figure
will appear.
2-18).
18
Document 900.0572
09/06
Advertisement
Table of Contents
