Figure 2-5 Authentication Dialog Box; Figure 2-6 Account Tab - Honeywell HNVE130A User Manual

1. Select the encoder from the list on the left-hand side of the application.
2. Select the Account tab on the right-hand side.
3. Select the Change Password checkbox and enter the current user ID (root)
and password (pass) in the Authentication dialog box (see
Figure 2-5
4. Enter the New Password in the appropriate text boxes (see
Figure 2-6
5. Click Save.
Note There is also a checkbox on the Account tab for a guest account (see
Figure
web interface without entering a user ID or password. There is a
hyperlink on the web interface login screen that provides guest
access. Guests are unable to change configuration. The guest
account can be activated by putting a check in the check box on the
Account tab. The guest account is active by default.
Changing the password in the DVM system, will change the password that will be
applied as default for all HNVE130A units installed in the future. When a new
HNVE130A unit is installed, a new streamer record is built using the DVM default
password. See
password. See Changing the HNVE130A Password
currently installed HNVE130A unit.
Rev 1.04
Authentication Dialog Box
Account Tab
2-6). The guest account allows a user to view images on the
Changing the DVM Default Password to change the DVM
to change the password of an
11
Figure 2-5).
Figure 2-6).
Document 900.0572
09/06