Installation; Mounting The Unit; Figure 2-1 Encoder Fastened To A Surface - Honeywell HNVE130A User Manual

Installation

Mounting the Unit

The HNVE130A has three basic mounting options:
• Placed flat on a shelf
• Fastened to a surface using the provided L-brackets
• Mounted in a 19" rack using the optional rack-mount accessory
If the encoder will be fastened to a surface, the L-brackets can be attached in one
of three different locations as indicated in
to the encoder using the four #2 phillips screws provided.
Figure 2-1
Front Mount for the Optional
Rack Mount Accessory
Surface Mount on
a Flat Surface
Rev 1.04
Encoder Fastened to a Surface
Figure 2-1 below. Attach the L-brackets
Back Mount for the Optional
Rack Mount Accessory
7
2
Document 900.0572
09/06