Installing The Hnve130A Adapter; Installing Adapter To Dvm Client - Honeywell HNVE130A User Manual

Note <NULL> in the StreamerUserName and StreamerPassword fields
means to use the default user name and password as defined in
tblStreamerTypes as set in the procedure above.
Note The new password will not take effect until either the camera settings
are reloaded in the DVM system or if the DVM system is restarted.
The camera settings can be reloaded by unchecking and rechecking
the enable checkbox on the DVM live video tab for each camera. The
DVM system can be re-started by shutting down and re-starting the
camera server.

Installing the HNVE130A Adapter

After installing or upgrading the DVM R200 system, the user needs to install the
HNVE130A Adapter for using the HNVE130A streamer. If you are installing a DVM
version newer than DVM R200 (DVM R200.2, for example), you will not need to
install the HNVE130A Adapter on the DVM machine.
Note Follow these instructions when installing the HNVE130A Adapter on
the DVM R200 system as well as when you are upgrading the
HNVE130A Adapter with any upgrades available from Honeywell in
the future.
This installation needs to be done on all the DVM Clients as well as the Honeywell
DVM Server, if DVM is installed on two or more different machines. If the DVM
Server and Client are on the same machine, run the installation only once. After
you have installed the HNVE130A Adapter on the Honeywell DVM clients and
server, you can configure cameras to capture and stream video from the REM
units.
Note It is recommended that in case this patch is installed in the machine
where the DVM Client application is running, DVM Client should be
closed before running this patch. Otherwise this patch will prompt to
close the DVM Client in order to complete the installation.

Installing Adapter to DVM Client

Following are the steps to install the Honeywell HNVE130A Adapter on the DVM
Clients:
1. Double-click the HNVE130A_RapidEye_Adapter.exe executable file.
The welcome screen appears.
2. Click Next.
Rev 1.04
Figure 2-12 will appear.
14 Document 900.0572
09/06