Table of Contents
Advertisement
4.
Select the Server Settings hyperlink above the login box (see
Once you have logged on, you will see a screen similar to
Figure 2-21
The Status screen provides summary information about the streamer and can be
used to verify basic configuration settings. Main menu items are listed on the left
pane of all pages and can be selected to proceed to each section. They will be
described in more detail below.
Network (Wired)
Although the network configuration can be adjusted using the web interface, it is
better to use the ENCP application. Adjusting the network configuration with the
ENCP application will allow you to set the device address even if the address is
not part of the current subnet.
Video
The video standard must be configured using the web interface to set the
encoder to NTSC or PAL mode. All other video parameters are set by the DVM
system.
Rev 1.04
HNVE130A Status Mode
22
Figure
2-20).
Figure
2-21.
Document 900.0572
09/06
Advertisement
Table of Contents
