Honeywell 10X User Manual page 40

OSD Menu
Preset Scene Setup
EDIT SCENE - PRESET 1
------------------------
MOVE TO TARGET POSITION
[NEAR:SAVE /FAR:CANCEL]
Preset Label Setup
EDIT LABEL - PRESET 1
------------------------
[ ]
----------
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------
40
Use the Joystick to move the camera to a desired position.
Save the Preset position by pressing the NEAR key
Press the FAR key to cancel targeting the Preset position.
Enter/edit the text that will show on the monitor when the camera arrives
at the selected Preset.
OK
CANCEL
Using the Left/Right/Up/Down movements of the joystick, scroll to the letter
or number you want and press the NEAR key.
If you want to enter a blank space, select the double quotation mark (" ").
If you want to delete a letter or number, select the backspace character ("
←").
After you finish entering text, move the cursor to OK and press the NEAR
key to save the completed label. To cancel the current change, move the
cursor to CANCEL and press the NEAR key.
[
Current Cursor Position
----------
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------
Space Char. Back Space Char.
]