System Initialize; Table 4-1 Factory Default Setting - Honeywell 10X User Manual

System Initialization

SYSTEM INITIALIZE

------------------------
CLEAR ALL DATA
CLR DISPLAY SET
CLR CAMERA SET
CLR MOTION SET
CLR EDIT DATA
REBOOT CAMERA
REBOOT SYSTEM
BACK
EXIT

Table 4-1 Factory Default Setting

Display Parameters
Camera ID
PTZ Information
Action Title
Preset Label
North Direction
Motion Parameters
Motion Lock
Power Up Action
Auto Flip
Jog Max Speed
Jog Direction
Freeze In Preset
Park Action
Document 800-06705 - Rev A - 12/10
Clear All Data
NO
NO
Clear Display Set
NO
NO
NO
Clear Camera Set
NO
NO
Clear Motion Set
Clear Edit Data
Reboot Camera
Reboot System
ON
AUTO
AUTO
AUTO
Pan 0°
OFF
ON
ON
120°/sec
INVERSE
OFF
OFF
Mini PTZ Dome Camera User Guide
Deletes all configuration data and resets the
system is set to the factory default.
Initializes all the configuration data for Display.
Initializes all the configuration data for Camera.
Initializes all the configuration data for Motion.
Deletes all the configuration data for Preset,
Swing, Pattern and Group.
Reboots the zoom camera module.
Reboots the system.
Camera Parameters
Focus Mode Semi-Auto
Digital Zoom ON
Image Flip OFF
Sharpness 16
White Balance AUTO
Backlight OFF
Day/Night AUTO2
Night→Day Level 176
Brightness 25
Iris AUTO
Shutter ESC
AGC HIGH
SSNR MIDDLE
SENS-UP AUTO (4 Frame)
User-Defined Data
Preset 1~128 Undefined
Swing 1~8 Undefined
Pattern 1~4 Undefined
Group 1~8 Undefined
45