Other Functions - Honeywell 10X User Manual

Operation

Other Functions

Power Up Action
Auto Flip
Parking Action
GLOBAL/LOCAL
Image Setup
Semi-Auto Focus
30
This setting defines a specific activity (Preset, Pattern, Swing, Group) to be performed in
the event that the power to the camera is cycled. This function enables the user to
resume, after turning on power, the last action being executed before turning off the
power. Please note that jog actions are not available to resume.
In the event that tilt angle arrives at the top of the tilt orbit (90°), the zoom module camera
turns on its axis by 180° at the top of the tilt orbit and moves to the opposite tilt direction
(180°) to keep tracing targets.
This feature allows the camera to begin a specified operation after a programmed time of
inactivity. This function makes the camera automatically run a pre-defined action if there
is no command from controller for a pre-defined time period. "Wait Time" means how long
a camera should wait from the most recent command before running the pre-defined
action. It can be set from 1 second to 3 hours.
White Balance (WB) and Auto Exposure (AE) can be set up independently for each
Preset. There are two modes: Global mode and Local mode. In Global mode, WB and/or
AE are set up simultaneously for all Presets. Global WB/AE parameters are set up in the
Zoom Camera Setup menu. In Local mode, WB and/or AE are set up separately for each
Preset. Local WB/AE parameters are set up in each Preset setup menu. The settings are
activated when the camera arrives at the Preset position. During jog operation, Global
WB/AE values should be applied. Note that Local mode settings have priority over Global
mode settings. Local WB/AE values do not change when Global WB/AE values are
change.
This mode automatically exchanges focus modes between Manual Focus mode and Auto
Focus mode by operation. Manual Focus mode activates in Preset operation and Auto
Focus mode activates during jog operation. In Manual Focus mode, focus data is
memorized for each Preset in advance. When the camera arrives at a Preset, the camera
remembers the focus data for that Preset, shortening the focus time. The focus mode
automatically changes to Auto Focus mode when jog operation starts.