Osd Menu; Quick Programming Guide; Main Menu - Honeywell 10X User Manual

OSD Menu

OSD Menu

Quick Programming Guide

The menu items with < > always have sub-menus.
To go to sub-menus or make the cursor move to the right, press the NEAR key.
To go to previous upper level menus, press the FAR key.
To make a selection, press the NEAR key
To cancel a selection, press the FAR key
To move the cursor in the menu, move the joystick to move in an Up/Down direction or in a Left/Right direction.
To change a value, move the joystick up or down.
To save changes, press the NEAR key.
To cancel changes, press the FAR key.

Main Menu

SPEED DOME CAMERA
------------------------
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME CAMERA SETUP>
<SYSTEM INITIALIZE>
EXIT
32
System Information Displays
configuration. The system setting can not be
changed using the OSD menu and the
information is for reference only.
Display Setup Enables the user to program how labels are
displayed on the monitor.
Dome Camera Setup Enables the user to configure various functions
of the camera.
System Initialize Initializes all system configurations and all data
to the factory default parameters.
the system information and