Honeywell 10X User Manual page 44

OSD Menu
EDIT GROUP 1
------------------------
NO ACTION ### DWELL OPT
------------------------
1 PRESET 1 00:03 360
2 NONE
3 NONE
4 NONE
5 NONE
------------------------
SAVE [ :MOVE CURSOR]
CANCEL [ :CHANGE VAL.]
EDIT GROUP 1
------------------------
NO ACTION ### DWELL OPT
------------------------
1 PRESET 1 00:03 360
2 NONE
3 NONE
4 NONE
5 NONE
------------------------
SAVE [NEAR:EDIT ACT]
CANCEL [FAR :EDIT END]
EDIT GROUP 1
------------------------
NO ACTION ### DWELL OPT
------------------------
1 PRESET 1 00:03 360
2 NONE
3 NONE
4 NONE
5 NONE
------------------------
SAVE
CANCEL
44
Edit the Action, Dwell and Option by moving the cursor.
After you have finished editing an Action, press the Near key to go to
the previous upper-level menu (Step
to select an Action number and repeat Step
editing the selected Group.
After you have finished editing the selected Group, press the FAR
key to exit. The cursor will then move to SAVE. Press the Near key to
save the data.
). Move the cursor Up/Down
~ Step to keep