Main Part Description - Honeywell 10X User Manual

Introduction

Main Part Description

Figure 1-1
Surface Mount Bracket
Mounting Screw Hole
Dome Cover
Assembly Stud
Dome Cover
Dome Cover Lock-up
Screw
Dome Cover Assembly
Stud
DIP Switch
Surface Mount Bracket
and Mounting Screw Hole
Main Connector
14
Parts Overview
DIP Switch
To protect the dome cover from scratches and dust, do not remove the
protective vinyl from the dome cover until the installation is complete.
Used to lock up the dome cover after attaching the dome cover to the
main body.
Used to line up the stud on the main body and the stud on the dome cover
when attaching the dome cover to the main body.
Used to set up camera IDs and protocols.
Used for surface mount type, wall mount type and ceiling mount type.
They are not used for in-ceiling mount type.
Used for the power wire, the video cable and the RS-485 communication
cable connection.
Main Connector
Dome Cover Lock-up Screw
Dome Cover