Table of Contents
Advertisement
Installation
Installation with Ceiling Mount Bracket
Remove the ceiling tile from the ceiling and cut a
hole whose diameter is 30—40 mm on the ceiling
tile and attach the ceiling mount bracket on it.
(Tapping M4×25)
Connect the main cable to the ports and install the
main body. (Machine M3×8)
20
Pull the main cable for the system as below. Turn
the bracket adapter on its axis in a clockwise
direction until it stops and then attach the surface
mount bracket. (Machine M3×8)
Align the dome cover stud with the stud on the main
body and slightly push the dome cover to the
ceiling. Turn the dome cover clockwise and install
the dome cover lock-up screw. Then remove the
protective vinyl from the dome cover. (Machine
M3×6)
Bracket Adapter
Surface Mount
Bracket
Advertisement
Table of Contents
