Setting Hardware Tab Options - Brady GlobalMark 2 User Manual

Setting Hardware Tab Options

Use the Hardware options tab for settings that affect your system's hardware.
Cutter Calibration
options appear
only on Color &
Cut system
The options are:
Speaker volume
(0-5)
Check Supply
Colors
5-8
Setting Hardware Tab Options
Figure 5-3. The System Setup Hardware tab.
Controls the volume of your system sounds. Enter a
value from 0-5, where 0 turns your sound off
completely.
When enabled, tells your system to read the current
supply cell. If there are any missing color names,
the system prompts you to supply them. See
Naming supply colors on page 5-9 for instructions.
Unavailable on
the Monocolor
system.