Connecting Your System And A Pc - Brady GlobalMark 2 User Manual

2. Choose the online tab, shown here:
3. Choose a connection type. If your PC does not have a USB connector, choose
serial.
Note:
4. Choose OK. You'll be returned to the Main Menu screen.

Connecting your system and a PC

In this procedure, you make the actual connection between the PC and your printer.
To place your label printing system online
1. Connect one end of the cable to your printing system and the other to a PC.
The cable you use, USB or serial, should be same as you used in the procedure
described in Setting Up Your System as a Hardware Device on page 12-3.
2. Turn on your printing system.
Figure 12-2. The online tab screen.
You'll also use the File Management Utility to upgrade the operating
system for your printer.
12-5
Connecting to a PC