Selecting Multiple Objects - Brady GlobalMark 2 User Manual

dotted lines disappear, but the markers always indicate that you have successfully
selected the object, as shown here:
Selected
object
Selection
markers
For instance, if you want to enlarge the coffee cup graphic in the label in Figure
4-3, you first select the graphic on the label using one of the methods described
below, then choose the Increase Size tool.
You can use either of the methods below to select an object in the Preview area on
the Editor window, depending on your preference and the equipment your system
offers:
Touch the object you want to select. Selection markers appear around the
object, indicating that it is selected.
Using the mouse, move the cursor to the object and click the left mouse button.
The object is highlighted to indicate that it is selected.
The changes you make will apply only to the object you have selected.
Hint!

Selecting multiple objects

To select multiple objects on a label, hold down the Shift key, then use either of the
methods described above.
4-8
Working in the Editor window
Figure 4-3. The Editor window with a graphic selected.
When your label contains multiple objects, if any object is selected, you
can press <Tab> to cycle through the objects on the screen.
Increase
Size tool