Accessing System Setup - Brady GlobalMark 2 User Manual

Accessing System Setup

When you change the pre-set system settings your system shipped with, you change
the default values your system uses to determine how your printer works. The
changes you make in the System Setup screens apply to your entire system.
Note:
To access the System Setup settings options
1. Choose the Setup button on the Main Menu screen (shown in Figure 3-1 on
5-2
Accessing System Setup
Be cautious about changing system settings. Remember that changes you
make will apply to your entire printing system.
To cancel changes and return to the default settings, touch or click the
Cancel button, shown at the left, while displaying any of the system
preference option tabs. Or press <Cancel> on your keyboard.
page 3-2).
You'll see the System Setup screen, shown here:
Figure 5-1. The System Setup screen.
The System Setup screen has as many as six tabs with options. Five tabs are
visible at one time on the screen. You may see fewer tabs at times, depending on
where you are in the system.
Use Tab
arrows to see
additional
tabs, unless
grayed out.