Cutting Out Text Objects - Brady GlobalMark 2 User Manual

2. On the Insert Object screen (Figure 10-1), choose Cut out object.
3. Select the type of object you want to cut out. The type you choose determines
the screen you will see next:
If you choose:
Text object
Graphic object
HotShape object

Cutting out text objects

The cutter cuts out each individual character in a Text cut out object.
Hint! See Weeding cut out text objects - 10-6 to learn how to make an
additional cut around the cut out text, for ease of use when removing the
cut out characters.
To cut out text objects
1. After selecting the Cut out object option on the Insert Objects screen, choose
Text.
2. On the Enter Text screen (shown in Figure 7-3 on page 7-5), enter the
characters you want to cut out.
3. Press OK when you're finished. You'll see the cut out new text object on the
Editor window.
4. Choose Print to cut out the object.
You'll see:
The Enter Text screen (Figure 7-3 on page 7-
5). You can choose from these fonts for cut out
text objects:
•
Arial 65 for BRC
•
Arial for BRC
•
Times New Roman for BRC.
Only normal text is supported. Cut out text
may not be bolded, italicized, or underlined.
The Graphics screen, shown in Figure 7-15
on page 7-23, with special options for cut out
graphics listed.
The HotShapes screen, shown in Figure 7-16,
Working with Cut-outs
10 5
-