About Objects - Brady GlobalMark 2 User Manual

About Objects

Before you begin this chapter, it's important to understand the term objects.
When you create a label, you build it by creating or adding objects to it. The
objects can be made either for printing or for cutting out (if you have the Color &
Cut system).
It may be useful to think of objects as "containers" that can hold various types of
content or data. You decide where to put an object and what to put in the container
when you create your labels. Once you have "filled" an object, it is named for its
contents, so it is called a text object, a graphic object, a bar code object, and so on.
The object types you can add to labels in this system are:
A single label can include multiple objects, such as graphics and variable text, or
text and bar codes. (For an example of a label that contains multiple objects, see
Figure 4-1 on page 4-2. The label pictured contains a graphic and a block of text.)
The system displays the objects on the Editor window, within the preview area.
The Editor window is ready to display the label as you create it. At this point, the
system operates with these defaults:
Hint!
7-2
About Objects
Text objects
Variable text objects
Graphic objects
Bar code objects
HotShape objects
The blank label displayed reflects the size and color of the tape installed.
The blank label displays with landscape print orientation assumed.
The magnification or zoom level is set to display 12 inches of label length, but
this does not reflect the actual printable length of the label. The objects you
insert determine the final length of the label, or, if you have a paneled ribbon
installed, the length of the panel determines the maximum length of the label.
See Checking Length on page 11-12 for more information.
You can set the length of your label before adding objects. Use the Set
Length option on the Size tab of the Label Properties screen.
The color of the objects you insert is determined by the ribbon you have
installed. If no ribbon is installed, the system assumes a black continuous
ribbon. See About Color on page 8-2 for more information.