Calibrating The Cutter; Setting Cutter Calibration Values - Brady GlobalMark 2 User Manual

2. Choose the Frame tab:
Figure 10-5. The Label Properties screen, Frame tab., on the
3. Select a Frame shape option: Rectangle or Rounded rectangle.
4. Check the Cut out frame option.
5. When you finish setting Label Properties options, click OK. See Adding a

Calibrating the Cutter

If your cuts are not aligned correctly, you can adjust the plotter cutter calibration
values previously set at the factory. You begin by using the Setup option on the
Main Menu screen to calibrate the cutter.

Setting cutter calibration values

When you enter values in the Cutter Calibration fields, the values must be positive
or negative whole numbers. Each increment of the number adjusts the cut made by
.001 inch. For instance:
Color & Cut system.
label frame - 6-31 for detailed information about the Label Properties options.
The Line
width and the
Line Color
options are
not available
if Cut out
frame is
enabled.
10
Working with Cut-outs
11
-