Restoring Default Cutter Calibration Settings - Brady GlobalMark 2 User Manual

Restoring default cutter calibration settings

To restore factory set calibration settings, you must re-enter the original values on
the Hardware tab. Your system ships with a label inside the printer applied at the
factory that lists those values.
To restore default calibration settings
1. Locate the factory-installed label on your machine.
2. On the Main Menu screen, select Setup.
3. On the System Setup screen, choose the Hardware tab.
4. Enter the original value in the Horizontal (x) field.
5. Enter the original value in the Vertical (y) field.
6. Choose OK.
10-14
Calibrating the Cutter