Connecting Peripherals - Brady GlobalMark 2 User Manual

Connecting Peripherals

This section describes how to get your system connected and powered up. You
should have already unpacked your printer, using the instruction sheet included in
the shipping box.
You connect your keyboard and your mouse, if you have one, and then the power
cord, to begin setting up your system. (The USB connection is discussed in Placing
Your System Online on page 11-4.)
Display
screen
Compact
memory
flashcard
port
USB port
Serial port
Mouse connector
Keyboard
connector
Step 1: Plug the keyboard cable into the keyboard connector, shown in Figure 2-2.
Step 2: If you have a mouse, plug the mouse cable into the mouse connector, as shown in
Figure 2-1
2-2
Connecting Peripherals
Figure 2-1. The label printer, side view.
Serial number
ON/OFF
switch
Fuse
Power
cord
connector