Saving Labels As Files - Brady GlobalMark 2 User Manual

Saving Labels as Files

Every time you create a Custom label or a pre-designed template label, you have
the option to save it as a file and to put it in a file group, so you can access it later.
Your label file is like a paper document you put in your file cabinet, and file groups
are like the file folders in which you put your papers. You can organize similar
label files into file groups in the same way as you organize similar paper files into
file folders.
When you have an open, unsaved label displayed in the Editor window, there are
two ways to save labels as files:
There are two places you can save files as well:
Hint!
By using the <Menu> key and following the prompts
By using the <File Option> key and following the prompts.
In your system's internal memory
On a compact flash memory card attached to your system. (See Installing a
compact flash memory card on page 2-13 for information.)
You can also save files to a PC if you are connected to one. See See
CHAPTER 12: Connecting to a PC, beginning on page 12-1, for
instructions.
Working with Files
9 3
-