About Files And File Groups - Brady GlobalMark 2 User Manual

About Files and File Groups

When you store a label, you name it and save it, and it becomes a file on which you
can then perform several operations. (You can also save multiple labels in a single
file, such as when you create a label set or when you create labels with variable
text. Refer to Creating Sets of Labels on page 6-21 for information on label sets,
and to Adding variable text objects on page 7-10 for information on variable text
labels.)
When you save a file, the system prompts you to put it into a file group. Ideally,
your file groups contain labels with similar characteristics, such as subject,
orientation, or size, but you can group any files together in a file group.
Hint!
The system saves the files in file groups in an internal storage area or on a memory
card attached to your system. (You can also save file groups to a PC. See
CHAPTER 12: Connecting to a PC, beginning on page 12-1, for more
information.)
Once you save a label as a file in a file group, you can:
9-2
About Files and File Groups
If you plan to print all the files in the file group in the same print job, it's
best if the files are set in the same orientation and use the same supplies.
See Printing labels in a file group on page 11-7 for more specific
information.
Open it
Add objects to it or remove objects from it
Print it by itself or print its entire file group at the same time
Create a new file of the same type
Delete it