Deselecting In The Editor Window; Undoing In The Editor Window; Working In Entry Screens; Navigating In Entry Screens - Brady GlobalMark 2 User Manual

Deselecting in the Editor window

You can deselect an object after you perform an action on a selected object, or if
you change your mind before you make changes to the selected item.
To remove the selection markers, touch any non-highlighted area of the screen. If
you are using a mouse, move the cursor to a non-highlighted area and click the left
mouse button to deselect.

Undoing in the Editor window

You can use this tool to reverse or undo your most recent action in the Editor
window:
The Undo icon is not valid at all times, however, as some formatting actions cannot
be undone. When Undo is not possible, this icon will be grayed out (or appear to be
dimmer) on the toolbar.

Working in Entry Screens

Entry screens are screens upon which you enter the parts that make up your label
and in which you enter information about the design of your label. You enter label
text and information about your label by using:
Screens usually contain one or more of these information entry devices, as shown
in Figure 4-6 on page 4-12 and Figure 4-7 on page 4-13.
Some screens may show options or areas as dimmed, or grayed out. This indicates
that particular option is disabled, or not available on your system or in the context
in which you are operating.

Navigating in entry screens

You can move around inside entry screens by touch, keyboard, or mouse:
Text entry areas
Entry fields
Buttons
Checkboxes
Radio buttons
Size adjustment buttons
Basic Procedures
4 9
-