Setting Bar Code Dimensions - Brady GlobalMark 2 User Manual

Setting bar code dimensions

Choose the Dimension tab on the Bar Code screen to set bar code measurements:
Use the Dimension tab to set these bar code options:
Height
Density
Ratio
7-20
Adding Objects
Figure 7-12. The Bar Code screen, Dimensions tab.
Set the bar code height (in the unit of measure
specified on the System Setup screen Localization
tab) by entering a height or choosing from the
options list.
Hint!
setting the height here is preferable to using the
Height option on the Bar Code Size and Location
tab.
Set the density in mils by choosing from this list.
The density is the thickness of the bars and how far
apart they are.
Hint!
bar code.
Set the width ratio by choosing from this list. Ratio
determines the relative width of the wide bars to the
narrow bars in the bar code.
If you want to make a bar code taller,
This setting determines the width of the