Cloud-Discovery Enable - Cisco MDS 9124 - Fabric Switch Reference

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

cloud-discovery enable

To enable discovery of cloud memberships, use the cloud-discovery command in configuration mode.
To disable discovery of cloud memberships, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
3.0(1)
Usage Guidelines
This command is not supported on the Cisco MDS 9124 switch.
Examples
The following example enables discovery of cloud memberships.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# cloud-discovery enable
The following example disables discovery of cloud memberships.
switch(config)# no cloud-discovery enable
Related Commands Command
cloud discover
cloud discovery
show cloud
OL-16217-01, Cisco MDS SAN-OS Release 3.x
cloud-discovery enable
no cloud-discovery enable
Modification
This command was introduced.
Description
Initiates manual, on-demand cloud discovery.
Configures cloud discovery.
Displays cloud discovery and membership information.
Cisco MDS 9000 Family Command Reference
cloud-discovery enable
4-105