Respond To A Hold Reversion Notification; Hunt Groups; Sign In And Out Of A Hunt Group; Intercom - Cisco 6961 - Unified IP Phone Standard VoIP Software Manual

Respond to a Hold Reversion Notification

Press the flashing amber line button or the Answer softkey to resume the call from hold.

Hunt Groups

Hunt groups are used to share the call load in organizations that receive a large number of incoming
calls.
Your system administrator sets up a hunt group with a series of directory numbers. When the first
directory number in the hunt group is busy, the system hunts for the next available directory number
in the group, then directs the call to that phone.
If you are a member of a hunt group, you can sign in to a hunt group when you want to receive calls,
and you can sign out of the group when you want to prevent calls from ringing on your phone.

Sign In and Out of a Hunt Group

1. Press the Hunt Group button to sign in.
Visual confirmation displays briefly.
2. Press the button again to sign out.
Signing out of a hunt group does not prevent non-hunt group calls from ringing your phone.

Intercom

Intercom allows you to place and receive one-way calls using a dedicated intercom line.
When you place an intercom call, the recipient's phone auto-answers with mute activated (whisper)
and broadcasts your message through the recipient's speakerphone—or through the headset or
handset, if one of these devices is active.
After receiving the intercom call, the recipient can initiate two-way audio (connected) to continue the
call.

Place an Intercom Call

1. Press the Intercom button.
If your phone auto-dials the intercom code, begin speaking after the alert tone. Otherwise, go to
Step 2.
2. Enter the intercom code and begin speaking after the alert tone.
54 OL-18397-01