Handset Rest - Cisco 6961 - Unified IP Phone Standard VoIP Software Manual

Handset Rest

Your system administrator may have mounted your phone on a wall. With a wall-mounted phone, you
might need to adjust the handset rest to ensure that the receiver will not slip out of the cradle.
1
1 Remove the handset from the cradle and pull the plastic tab from the handset rest.
2 Rotate the tab 180 degrees.
Hold the tab between two fingers, with the corner notches facing you. Make sure the tab lines
3
up evenly with the slot in the handset cradle.
Press the tab evenly into the slot. An extension protrudes from the top of the rotated tab. Return
4
the handset to the handset rest.
Cisco Unified IP Phone 6921, 6941, and 6961 User Guide for Cisco Unified Communications Manager 7.1 (SCCP)
2 3
Your Phone
19