Malicious Call Identification; Trace A Suspicious Call; Meet Me; Host A Meet-Me Conference - Cisco 6961 - Unified IP Phone Standard VoIP Software Manual

Related Topics
Speed Dial, page 60
•
Call Park, page 45
•
Call Pickup, page 47
•

Malicious Call Identification

Malicious Call Identification (MCID) allows you to identify an active call as suspicious, which initiates
a series of automated tracking and notification messages.

Trace a Suspicious Call

Press the Malicious Caller ID button to send a silent notification message to your system administrator.
When the silent notification message is sent, your phone provides both a visual and audible
confirmation.

Meet Me

Meet Me allows you to call a predetermined number at a scheduled time to host or join a conference.
The conference begins when the host connects. Participants who call the conference before the host
has joined hear a busy tone and must dial again.
The conference ends when all participants hang up; the conference does not automatically end when
the host disconnects.

Host a Meet-Me Conference

1. Obtain a Meet-Me phone number from your system administrator.
2. Distribute the Meet-Me phone number to participants.
3. When you are ready to start the meeting, go off-hook to get a dial tone, then press the Meet Me
softkey.
4. Dial the Meet-Me phone number.

Join a Meet-Me Conference

Dial the Meet-Me phone number (provided by the conference host).
If you hear a busy tone, the host has not yet joined the conference. In this case, try your call again.
56 OL-18397-01