Cisco 6961 - Unified IP Phone Standard VoIP Software Manual page 35

Transfer button
4
5 Conference button
Hold button
6
Navigation bar and
7
Select button
Programmable feature
8
buttons
Headset button
9
10 Speakerphone button
11 Keypad
Cisco Unified IP Phone 6921, 6941, and 6961 User Guide for Cisco Unified Communications Manager 7.1 (SCCP)
Transfers a call.
Creates a conference call.
Places an active call on hold.
The Navigation bar allows you to scroll through menus and highlight
items. When phone is on-hook, displays phone numbers from your
Placed Call listing (up arrow) or your speed dials (down arrow).
The Select button allows you to select a highlighted item.
Depending on how your system administrator sets up the phone,
programmable feature buttons provide access to:
• Phone lines and intercom lines
• Speed-dial numbers (speed-dial buttons, including the Line Status
speed-dial features)
• Web-based services (for example, a Personal Address Book
button)
• Call features (for example, a Privacy button)
Buttons illuminate to indicate status:
• Green, steady—Active call or two-way intercom call
• Green, flashing—Held call
• Amber, steady—Privacy in use, one-way intercom call, DND
active, or logged into Hunt Group
• Amber, flashing—Incoming call or reverting call
• Red, steady—Remote line in use (shared line or Line Status)
• Red, flashing—Remote line on hold
Toggles the headset on or off. When the headset is on, the button is lit.
Toggles the speakerphone on or off. When the speakerphone is on, the
button is lit.
Allows you to dial phone numbers, enter letters, and select menu
items (by entering the item number).
Your Phone
23