Cisco 6961 - Unified IP Phone Standard VoIP Software Manual page 98

Accessibility Feature
1. High-Contrast
Visual and Audible
Alert of Incoming
Call
2. Back-Lit LCD
Screen and
Programmable
Contrast
3. Line and Feature
Buttons
4. Large Buttons to
Access
Applications, Voice
Messages,
Contacts, Hold,
Transfer, and
Conference
5. Audible
Notification of
Phone State
6. Standard 12-Key
Layout
86
Description
Cisco Unified IP Phones provide an audible alert,
and the handset provides a visual alert when the
phone receives an incoming call. The handset light
strip flashes during incoming calls and stays lit
when a voice-mail message is received.
Users with low vision can adjust the contrast.
Users can use the line buttons to initiate, answer, or
switch to a call on a particular line. Features, such
as speed dial, Line Status, Privacy, DND, and
Service URLs, can be assigned to feature buttons.
Large buttons provide to easy access to phone
applications, voice messages, corporate and
personal directories, and calling features.
For audible notification of the phone state, users
can:
• Toggle the Mute and Speakerphone buttons on
and off to indicate the state of the phone.
• Use the Mute button to toggle the microphone
on or off. When the microphone is muted, the
button is lit.
• Use the Speakerphone button to toggle the
speakerphone on or off. When the
speakerphone is on, the button is lit.
Cisco Unified IP Phone keypads provide standard
12-key layout, which enables users to use existing or
familiar key positions (including a nib on Key 5).
Set Up Requirements
Standard on all
phones; set up is
required.
Standard on all
phones; no set up is
required.
Set up is required.
Your system
administrator sets up
programmable
feature buttons to
your phone.
Standard on all
phones; no set up is
required.
Standard on all
phones; no set up is
required.
Standard on all
phones; no set up is
required.
OL-18397-01